Modified Chinese quince oligomeric proanthocyanidin protects deep-frying oil quality by inhibiting oxidation.

Chinese quince (Chaenomeles sinensis) fruit is an underutilized resource, rich in proanthocyanidins with antioxidant ability but poor lipid solubility. In this study, a novel modified oligomeric proanthocyanidin (MOPA) was prepared, which exhibited favorable lipid solubility (354.52 mg/100 g). It showed higher radical scavenging abilities than commercial antioxidant-BHA (butylated hydroxyanisole), both at 0.4-0.5 mg/mL. The addition of MOPA (0.04 %wt.) significantly increased the oxidative stability index of the soybean oil from 5.52 to 8.03 h, which was slightly lower than that of BHA (8.35 h). Analysis of the physicochemical properties and composition of oil during deep-frying showed that MOPA demonstrated significant antioxidant effects and effectively restricted the oil oxidation. This inhibition also delays the formation of heterocyclic amines (HAs) in fried food, thereby reducing the migration of HAs from food to deep-frying oil. Therefore, MOPA is a promising novel liposoluble antioxidant for protecting the quality of deep-frying oil.

An Overview of Parenteral Nutrition from Birth to Adolescence Based on a Composite Fish Oil Containing Lipid Emulsion and a Pediatric Amino Acid Solution.

Intestinal failure (IF) is characterized by a critical reduction in functional gut mass below the minimum needed for optimal growth in children. It requires parenteral nutrition (PN) and home-PN (HPN), which is challenging in terms of meeting nutritional needs according to age, growth velocity, clinical situation, and rapid changes in fluid and electrolyte requirements. Due to these complex requirements, age-adapted multi-chamber bags (MCBs) are important additions to the nutrition armamentarium. The launch of composite fish oil (FO)-containing intravenous lipid emulsions (ILEs) heralded the development of MCBs containing these ILEs in combination with a crystalline amino acid solution adapted for pediatric use. The safety and efficacy of lipid and amino acid components in this context have been widely documented in numerous published studies. This narrative manuscript includes a review of the articles published in PudMed, Embase, and Google Scholar up to June 2023 for the age groups of term infants to children and adolescents. Preterm infants with their highly specific demands are not included. It aims to offer an overview of the clinical experience regarding the use of a composite FO-based ILE and a developed specific amino acid solution.

Preparation and structural characterization of epoxidized soybean oils-based pressure sensitive adhesive grafted with tea polyphenol palmitate.

Vegetable oils-based pressure sensitive adhesives (PSAs) are green and sustainable but face unsatisfactory adhesion strengths and are prone to aging during storage and application due to the existence of residual double bonds and massive ester bonds. Nine common antioxidants (tea polyphenol palmitate (TPP), caffeic acid, ferulic acid, gallic acid, butylated hydroxytoluene, tertiary butylhydroquinone, butylated hydroxyanisole, propyl gallate, and tea polyphenols) were grafted into epoxidized soybean oils-PSA (ESO-PSA) system to enhance antiaging properties and adhesion strengths. Results showed ESO-PSAs grafted with caffeic acid, tertiary butylhydroquinone, butylated hydroxyanisole, propyl gallate, tea polyphenols, or TPP didn't occur failure with TPP having best performance. The optimal conditions were ESO reacted with 0.9 % TPP, 70 % rosin ester, and 7.0 % phosphoric acid at 50 °C for 5 min, under which peel strength and loop tack increased to 2.460 N/cm and 1.66 N, respectively, but peel strength residue reduced to 138.09 %, compared with control (0.407 N/cm, 0.43 N, and 1669.99 %). Differential scanning calorimetry and thermogravimetric results showed TPP grafting increased the glass transition temperature of ESO-PSA slightly but improved its thermal stability significantly. Fourier transform infrared spectroscopy and 1H nuclear magnetic resonance results showed TPP, phosphoric acid, and rosin ester all partially participated in the covalently crosslinking polymerization of ESO-PSAs and the rest existed in the network structures in the free form.

Case study of chemical and enzymatic degumming processes in soybean oil production at an industrial plant.

The vegetable oil degumming process plays a critical role in refining edible oil. Phospholipids (PL) removal from crude extracted soybean oil (SBO) by the enzymatic degumming process has been investigated in this work. Enzymatic degumming of extracted SBO with microbial phospholipase A1 PLA-1 Quara LowP and Lecitase Ultra enzymes have also been studied comparatively. The main novelty of our work is the use of the enzymatic degumming process on an industrial scale (600 tons a day). Many parameters have been discussed to understand in detail the factors affecting oil losses during the degumming process. The factors such as chemical conditioning (CC) by phosphoric acid 85%, the enzyme dosage mg/kg (feedstock dependent), the enzymatic degumming reaction time, and the characteristics of the plant-processed SBO have been discussed in detail. As a main point, the degummed oil with a phosphorus content of < 10 mg/kg increases yield. Quara LowP and Lecitase Ultra enzymes are not specific for certain phospholipids PL; however, the conversion rate depends on the SBO phospholipid composition. After 4 h, over 99% of Phospholipids were degraded to their lysophospholipid LPL (lysolecithin). The results showed a significant effect of operating parameters and characteristics of different origins of SBO, fatty acids FFA content, Phosphorus content and total divalent metals (Calcium Ca, Magnesium Mg and Iron Fe mg/kg) content on the oil loss. The benefit of using enzymatic degumming of vegetable oils rather than traditional chemical refining is that the enzymatic degumming process reduces total oil loss. This decrease is known as enzymatic yield. The enzymatic degumming also decreases wastewater and used chemicals and running costs; moreover, it enables physical refining by lowering the residue phosphorus to < 10 mg/kg.

Effects of catechin on the stability of myofibrillar protein-soybean oil emulsion and the adsorbed properties of myosin at the oil-water interface.

The effects of different concentrations of catechin on the stability of myofibrillar protein-soybean oil emulsions and the related mechanisms were investigated. Adding 10 µmol/g catechin had no obvious effects on the emulsion stability and myosin structure, but 50, 100 and 200 µmol/g catechin decreased the emulsion stability. The microstructure observations showed that 10 µmol/g catechin caused a dense and uniform emulsion to form, whereas 50, 100 and 200 µmol/g catechin induced the merging of oil droplets. The addition of 50, 100 and 200 µmol/g catechin caused a decline in both the total sulfhydryl content and surface hydrophobicity, suggesting protein aggregation, which decreased the adsorption capacity of myosin and the elasticity of interfacial film. These results suggested that higher concentrations of catechin were detrimental to the emulsifying properties of myosin and that the dose should be considered when it is used as an antioxidant.

Thermophysical properties of blends composed of Amazonian fats and soybean oil.

Thermophysical properties of blends composed of soybean oil and fats obtained from fruits and seeds from Brazilian Amazonian region (Murumuru, Tucuma, and Bacuri) were investigated, looking for more sustainable alternatives to the mostly used industrial fats, for applications in product formulation. Fatty acid (FA) and triacylglycerol composition, nutritional indexes, solid fat content (SFC), compatibility, consistency, melting, and crystallization profiles were determined. Soybean oil increased blends' unsaturated FA profile, leading to lower SFC, but higher nutritional quality. Fats' melting profiles were significantly altered with soybean oil addition: temperatures decreased with the increase in oil content. Iso-solids diagrams showed that lipids were compatible, which is a technological advantage. SFC and consistency profiles suggested that tucuma and murumuru fats could be used as hardstocks for lipid products, and bacuri fat could be applied in products such as margarine and spreads. Blends could improve fats' spreadability and other technological properties, which is promising for applications in products formulation.

Fully bio-based epoxy resins from lignin and epoxidized soybean oil: Rigid-flexible, tunable properties and high lignin content.

The application of epoxidized soybean oil (ESO) in thermosetting polymers is impeded by its unsatisfactory thermomechanical properties. Here, in order to address the limitation, technical lignin was modified by tung oil anhydride and then used as the hardener to compensate for the inherent flexibility defects of ESO thermosets (TLs). As the lignin content increased, a notable improvement in the activation energy of TLs was observed, attributed to the restraining effect of lignin's rigid structure on segmental relaxation. Concurrently, the tensile strength of TLs increased from 2.8 MPa to 34.0 MPa, concomitant with a decrease in elongation at break from 32.9 % to 8.0 %. Comparative analysis with TL-0 (devoid of lignin) demonstrated substantial enhancements in glass transition temperature, shape fixation ratio, and shape recovery ratio for TL-50 (comprising 50 wt% of lignin), elevating from 16.9 °C, 89.1 %, and 89.5 % to 118.6 °C, 94.0 %, and 99.3 %, respectively. These results unequivocally highlight the favorable dynamic mechanical and shape memory properties conferred upon TLs by lignin addition. While the introduction of lignin adversely affected thermal stability, a notable improvement in char yield (800 °C) was observed. Collectively, these findings underscore the potential of technical lignin as a promising bio-based curing agent for ESO.

Influence of starch silylation on the structures and properties of starch/epoxidized soybean oil-based bioplastics.

The present work systematically investigated the influence of starch silylation on the structures and properties of starch/epoxidized soybean oil-based bioplastics. Silylated starch was synthesized using starch particles (SP-ST) or gelatinized starch (SG-ST) under different silane hydrolysis pHs. Due to the appearance of -NH2 groups and lower OH wavenumbers, SP-ST obtained at pH 5 showed higher silylation degree and stronger hydrogen bond interaction with epoxidized soybean oils (ESO) than that at pH 11. The morphology analysis revealed better interfacial compatibility of ESO and SP-ST. The tensile strength of the samples containing SP-ST increased by 51.91 % than the control, emphasizing the enhanced interaction within the bioplastics. However, tensile strength of the bioplastics with SG-ST decreased by 59.56 % due to their high moisture contents from unreacted silanes. Additionally, the bioplastics with SG-ST exhibited an obvious reduction of thermal stability and an increase in water solubility because of the presence of unreacted APMS. The bioplastic degradation was not prevented by starch silylation except high pH. The bioplastics showed the most desirable tensile properties, thermal stability, and water solubility when starch was surface-modified with silanes hydrolyzed at pH 5. These outcomes made the fabricated bioplastics strong candidates for petroleum-based plastics for packaging applications.

On-Line Monitoring of Enzymatic Degumming of Soybean Oil Using Near-Infrared Spectroscopy.

Degumming is an oil refinement process in which the naturally occurring phospholipids in crude vegetable oils are removed. Enzymatic degumming results in higher oil yield and more cost-efficient processing compared to traditional degumming processes using only water or acid. Phospholipase C hydrolyses phospholipids into diglycerides and phosphate groups during degumming. The diglyceride content can therefore be considered a good indicator of the state of the enzymatic reaction. This study investigates the use of near-infrared (NIR) spectroscopy and chemometrics to monitor the degumming process by quantifying diglycerides in soybean oil in both off-line and on-line settings. Fifteen enzymatic degumming lab scale batches originating from a definitive screening design (with varying water, acid, and enzyme dosages) were investigated with the aim to develop a NIR spectroscopy prediction method. By applying tailored preprocessing and variable selection methods, the diglyceride content can be predicted with a root mean square error of prediction of 0.06% (w/w) for the off-line set-up and 0.07% (w/w) for the on-line set-up. The results show that the diglyceride content is a good indicator of the enzyme performance and that NIR spectroscopy is a suitable analytical technique for robust real-time diglyceride quantification.

Texture and volatile profiles of beef tallow substitute produced by a pilot-scale continuous enzymatic interesterification.

Edible beef tallow (BT) has been widely used in Sichuan hotpot due to its unique flavor and texture. However, BT should not be consumed in excess caused by its trans-fatty acids and cholesterol issues. In this study, a BT substitute was prepared after enzymatic interesterification in a pilot-scale packed-bed reactor using soybean oil and fully hydrogenated palm oil (4:3, w/w) as feedstock. The products were characterized against BT in terms of fatty acid/triacylglycerol compositions, solid fat content, polymorphism, and melting/crystallization behaviors to select the most promising BT substitute. The optimal flow rate was 120 mL/min. Changes in volatile compounds during stir-frying and simmering were also investigated for Sichuan hotpots made with these two oils. The volatile compounds of BT substitute were similar to that of natural BT. The findings will contribute to expanding the base oil categories of Sichuan hotpot oils.

Modification of palm fiber with chitosan-AESO blend coating.

Natural fibers are available as an essential substitute for synthetic fiber in many applications. However, the sensitivity of Chinese Windmill Palm or Trachycarpus Fortune Fiber (TFF) to water causes low interfacial bonding between the matrix and the fiber and at the end reduces the mechanical properties of the composite product. Alkaline treatment improves mechanical properties and does not affect water absorption. Hence, additional treatment in the coating is required. This study uses alkaline treatment and coating modification using blended chitosan and Acrylated Epoxidized Soybean Oil (AESO). Blend coating between AESO and chitosan is performed to increase water absorption and mechanical properties. TFF water resistance improved significantly after the coating, with water absorption of the alkaline/blend coating-TFF of 3.98 % ± 0.52 and swell ability of 3.156 % ± 0.17. This indicated that blend coating had formed a cross-link of fiber and matrix after alkalization. Thus, the single fiber tensile strength increased due to the alkaline treatment, and water absorption decreased due to the coating. The combination of alkaline treatment and blend coating on TFF brings excellent properties, as shown by the increase in tensile strength in both single fiber test and composite.

Photoacoustic Spectroscopy Combined with Integrated Learning to Identify Soybean Oil with Different Frying Durations.

Soybean oil produces harmful substances after long durations of frying. A rapid and nondestructive identification approach for soybean oil was proposed based on photoacoustic spectroscopy and stacking integrated learning. Firstly, a self-designed photoacoustic spectrometer was built for spectral data collection of soybean oil with various frying times. At the same time, the actual free fatty acid content and acid value in soybean oil were measured by the traditional titration experiment, which were the basis for soybean oil quality detection. Next, to eliminate the influence of noise, the spectrum from 1150 cm-1 to 3450 cm-1 was selected to remove noise by ensemble empirical mode decomposition. Then three dimensionality reduction methods of principal component analysis, successive projection algorithm, and competitive adaptive reweighting algorithm were used to reduce the dimension of spectral information to extract the characteristic wavelength. Finally, an integrated model with three weak classifications was used for soybean oil detection by stacking integrated learning. The results showed that three obvious absorption peaks existed at 1747 cm-1, 2858 cm-1, and 2927 cm-1 for soluble sugars and unsaturated oils, and the model based on stacking integrated learning could improve the classification accuracy from 0.9499 to 0.9846. The results prove that photoacoustic spectroscopy has a good detection ability for edible oil quality detection.

Effects of ultrasound on the oxidation and structure of myofibrillar protein in the presence or absence of soybean oil.

BACKGROUND: Ultrasound is widely used as a novel non-thermal processing technique to improve protein properties. In recent decades, applying ultrasound-assisted emulsification (UAE) to produce protein-stabilized emulsion has attracted people's attention. Instead of applying ultrasound to treat a single protein solution, UAE treatment refers to the use of sonication to a mixture of protein and oil. The purpose of this study was to compare the different effects of ultrasound treatment on the properties of myofibrillar protein (MP) in the presence or absence of soybean oil. A suitable sonication power was selected based on the change in emulsion properties. RESULTS: 300 W sonication power was selected because of its most effectively decreased emulsion droplet size and increased absolute zeta potential. Sonication more significantly increased the protein carbonyl content and disulfide bonds of the MP-soybean oil sample compared with the MP sample. Due to the presence of oil, ultrasound could unfold more protein molecules, illustrated by a lower α-helix content and intrinsic fluorescence intensity, and a higher surface hydrophobicity. Results of liquid chromatography-tandem mass spectrometry illustrated that sonication enhanced the myosin heavy chain and actin content at the soybean oil interface as well as accelerated the myosin light chain to separate from myosin in the MP-soybean oil system. CONCLUSION: Ultrasound treatment could lead to a higher level of protein oxidation and greater protein molecule exposure in the MP in the presence of oil system than in the oil-free MP system. © 2023 Society of Chemical Industry.

Formation and application of edible oleogels prepared by dispersing soy fiber particles in oil phase.

Oleogels containing less saturated and trans-fats were considered as an ideal option to replace the solid fats in foods. In this research, oleogel was fabricated by dispersing soy fiber particles (SFP) in soy oil, and further it was used in bread preparation. Effect of the particle size, particle content and the second fluid content on the formation of oleogels were evaluated, based on the appearance and rheological properties. Results showed that the suspension of SFP in soy oil (24%, w/w) could be transformed into gel-like state, upon the addition of the second fluid. The SFP based networks were dominated by the capillary force which was originated from the second fluid. The rheological properties and yield stress of the oleogels could be modulated by particle size and particle content of SFP in oil phase, as well as the second fluid content in the system. When the oleogels were applicated in bread preparation, a layered structure could be formed in the bread, indicating the possibility of replacing the solid fats in bakery products by our oleogels. Our results offered a feasibility approach for oil structuring with natural raw materials, and developed a new approach to replace the solid fats in foods.

Oil body extraction from high-fat and high-protein soybeans by laccase cross-linked beet pectin: physicochemical and oxidation properties.

BACKGROUND: Soybean oil bodies (SOB) are droplets of natural emulsified oil. Soybean oil emulsifies well but it is easily oxidized during storage. Beet pectin is a complex anionic polysaccharide, which can be adsorbed on the surface of liposomes to improve their resistance to flocculation. Laccase can covalently cross-link ferulic acid in beet pectin, and its structure is irreversible, which can improve the stability of polysaccharides. RESULTS: At pH 2.5, laccase cross-linked beet pectin high-oil soybean oil body (HOSOB) and high-protein soybean oil body (HPSOB) emulsions showed obvious aggregation and severe stratification, and the oxidation of the emulsions was also high. The flocculation of emulsions decreased with an increase in the pH. The effect of pH on the flocculation of emulsion was confirmed by confocal laser electron microscopy. The ζ potential, emulsification, and rheological shear force increased with increasing pH whereas the particle size and surface hydrophobicity decreased with increasing pH. CONCLUSION: This experiment indicates that the physicochemical stability of the two composite emulsions was strongly affected under acidic conditions but stable under neutral and weakly alkaline conditions. Under the same acid-base conditions, the degree of oxidation of HPSOB composite emulsion changes substantially. The results of this study can provide a basis for the design of very stable emulsions to meet the demand for natural products. © 2023 Society of Chemical Industry.

Fully bio-based hydroxy ester vitrimer synthesized by crosslinking epoxidized soybean oil with doubly esterified starch.

Catalyst-free fully bio-based hydroxyester (BHE) vitrimers were synthesized by crosslinking and plasticizing epoxidized soybean oil with synthesized acetylated starch succinate monoesters to investigate the effects of different starch structures on the properties of the BHE vitrimers. The BHE vitrimers possessed a lower glass transition temperature as well as better solvent resistance and reprocessing performance compared to traditional starch-based materials. Owing to dynamically covalent bonds, the migration and exudation of plasticizers were avoided. A maximum strain of 230 % was achieved to prevent the retrogradation and brittleness of starch-based materials. Furthermore, the mechanical properties remained unchanged after three reprocessing cycles. Consequently, the obtained BHE vitrimers are eco-friendly and sustainable.

Monoacylglycerol lipase from marine Geobacillus sp. showing lysophospholipase activity and its application in efficient soybean oil degumming.

Enzymatic degumming is an essential refining process to improve oil quality. In this study, a monoacylglycerol lipase GMGL was derived from marine Geobacillus sp., and was found that not only took monoacylglycerol (MAG) as substrate, but also had activity toward lysophosphatidylcholine (LPC), lysophosphatidylethanolamine (LPE) and glycerolphosphatidylcholine (GPC). Binding free energy showed LPC and LPE could bind with enzyme stably as MAG. It presented great potential in the field of enzymatic degumming. The phosphorus content in crude soybean oil decreased from 680.50 to 2.01 mg/kg and the yield of oil reached to 98.80 % after treating with phospholipase A1 (Lecitase Ultra) combined with lipase GMGL. An ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS) was developed to identify 21 differential phospholipids between crude soybean oil and enzymatic treatment. This work might shed some light on understanding the catalytic mechanism of monoacylglycerol lipase and provide an effective strategy for enzymatic degumming.

Preparation and characterization of bioplastics from silylated cassava starch and epoxidized soybean oils.

In this work, a systematic coupling study of silane coupling agent between starch and epoxidized soybean oils (ESO) was carried out. Starch was modified by 3-aminopropyl trimethoxy silane (APMS) with various contents of NaOH. The APMS-modified starch was incorporated with ESO to synthesize the bioplastics by solution casting. As demonstrated by the FTIR spectra, the hydrogen bond interactions among starch molecules were inhibited by the modification. This outcome provided higher interaction and compatibility of starch with ESO, as confirmed by FESEM. TGA showed that the thermal stability of starch decreased considerably after the silylation. In contrast, the produced bioplastics with silylated starch exhibited higher thermal stability than the control sample. Regarding the bioplastics, an obvious increase of tensile strength from 5.78 MPa to 9.29 MPa was obtained. This work suggested a simple and effective modification technique by APMS to improve compatibility of starch/ESO-based bioplastics with superior mechanical and thermal properties.

Bio-based Polyurethane Based on a Dynamic Covalent Network with Damage Tolerance for Controlled Release of Fertilizers.

Bio-based polyurethanes are promising for the controlled release of nutrients and fertilizers, but their toughness and plasticity need to be improved. We developed a smooth, dense, elastic, and indestructible bio-based polyurethane (BPU) coating with a nutrient controlled release ∼150% superior, a tensile strength ∼300% higher, and a toughness ∼1200% higher than those for the original BPU coating. Through a one-step reaction of soybean oil polyols (accounting for more than 60%), isocyanate, and benzil dioxime, the dynamic covalent network based on oxime-carbamate replaces part of irreversible covalent cross-linking. The dynamic fracture-bonding reaction in the modified coating BPU can effectively promote the hydrogen bond recombination and oxime-carbamate chain migration in the coating process, which avoids the structural defects caused by coating tear and fertilizer collision. This work provides a simple and versatile strategy for building controlled-release fertilizer coatings.

Crystallization behavior and compatibility analysis of beef tallow-based binary/ternary fat mixture systems.

Crystallization behavior and compatibility of fat blend systems are closely related to the stability fat food. The graded binary and ternary blends of beef tallow (BT), palm oil (PO), and soybean oil (SO) were comprehensively analyzed, including lipid composition, phase behavior, crystallization behavior, solid fat content (SFC), and compatibility. It was found that, unlike the monotectic behavior of BT/SO blends, BT/PO blends were dominated by eutectic behavior, while all the binary blends exhibited ß' polymorph. The addition of BT in the binary blends not only increased the liquid phase transition temperature but also played a more important role in the SFC variation at 0-40 °C. The eutectic growth behavior of blends might be that the TAG component of PO grew on the peripheral of BT seed crystals. In addition, BT/PO/SO ternary blends showed good compatibility and ß' polymorph. Our results provide potential formulations for beef tallow-based shortening production.